Stone machinery equipment in the process of use, often because of the impurities produced during the cutting process caused a layer of surface stains on the equipment surface, thus affecting the use of stone machinery equipment. Sawing machine is a highly efficient stone equipment. In the process of use, because of the intensity of cutting, the spilled stone residue often adheres to the surface of the sawing machine. Over time, the accumulation of stains will affect the cutting process of sawing machines to a large extent. Then, after a long period of use, how should the sawing machine be cleaned?
Before cleaning, be sure to turn off the mechanical power supply to ensure that the equipment is cleaned without electricity.
In the process of mechanical cleaning, non-metallic hammer rods can be used to knock the tubing, which can be struck continuously or discontinuously, so as to remove the attachments in the pipeline.
When the general hydraulic sawing machine is cleaned, the working hydraulic oil or trial run oil is mostly used. No kerosene, gasoline, alcohol, steam or other liquids can be used to prevent corrosion of hydraulic components, pipelines, oil tanks and seals. The cleaning time is usually (48-60) hours, depending on the complexity of the system, the requirement of filtration accuracy and the degree of pollution.
In order to prevent corrosion caused by external moisture, the hydraulic pump must be operated continuously until the temperature is restored to normal. After cleaning, remove the cleaning oil in the loop.